GLUSHITEL SILENCER

AK47 / MULTI-USE CENTERFIRE RIFLE SILENCER

The Glushitel Silencer was originally designed to be a hard-use, low back pressure silencer for the AK47 that still maintains a high level of performance.

While it excels in that role, it serves just as well as a multi-use silencer across a wide range of hosts and calibers from 5.56MM to 9MM.

The Glushitel features a coaxial design made entirely from 17-4 H900 Stainless Steel, with the outer tube being precision welded on a robotic welder, allowing it to be full-auto rated with no temperature restrictions.

Available in both a "K" Model (6") for those with priorities focused on shorter weapon length, better maneuverability, and lighter weight rather than just suppression, and an "L" Model (8") for those seeking maximum suppression and willing to accept a slightly longer and heavier silencer to obtain the extra performance.

If you are looking for that one silencer to move from your AR15 to your AK47 to your bolt and lever action hunting rifles and then over to your PCC's as well, the Glushitel Silencer is what you seek.

Length = 8" (L) / 6" (K)
Outside Diameter = 1.83"
Weight = 19.4 oz. (L) / 14.3 oz. (K)
Caliber = 7.62 MM (Will safely clear bullets up to 0.358" diameter)
Mounting Threads = 1.375" x 24 tpi (ASR Bravo, HUB, etc.)
Finish = Matte Heat Treat (Bronze) or Black Cerakote
Materials = 17-4 H900 Stainless Steel
Full Auto Rated = Yes
User Serviceable = No
Warranty = Limited Lifetime Warranty
What's Included: Owner's Manual
Thread Adapters / Mounts sold separately

Glushitel-L:

16" AK47 / 7.62 x 39MM 123gr FMJ = 136.1 dBA (Muzzle Left Mil Std microphone location)
- Compare to Military Arms Channel Test of Dead Air Wolverine = 140.6 dBA (Muzzle Left Mil Std microphone location)

16" AR15 / 5.56 x 45MM 62gr FMJ (M855) = 136.2 dBA (Shooter's Ear microphone location using Thunder Beast Silencer Summit measurements)

5" AR15 / 9 x 19MM 147gr Subsonic = 127.8 dBA (Muzzle Left microphone location using Thunder Beast Silencer Summit measurements)

CARTRIDGE RESTRICTIONS:
- Max Bullet Diameter = 0.358”
- Max Case Head Diameter = 0.506”
- Max Case Length = 2.05”
- For use with most standard short action rifle cartridges and smaller including .308 Winchester, 6.5 Creedmoor, .243 Winchester, .22-250 Remington, .30-30 Winchester, 7.62 x 39MM, 6.5 Grendel, 6MM ARC, .224 Valkyrie, .350 Legend, .223 Remington, .300 Blackout, .357 Magnum, 9 x 19MM, etc.
- NOT for use with long action or magnum cartridges including .30-06 Springfield, .270 Winchester, any WSSM, WSM, PRC, RUM, Weatherby Mag, Rem Mag, Win Mag, etc.
BARREL LENGTH RESTRICTIONS:
- 18” or Longer = .308 Winchester / 6.5 Creedmoor / .243 Winchester / .22-250 Remington, etc.
- 12” or Longer = 7.62 x 39MM / 6.5 Grendel / 6MM ARC / .224 Valkyrie, etc.
- 10.5” or Longer = 5.56 x 45MM / .223 Remington
- 8” or Longer = .300 Blackout
- 6” or Longer = .357 Magnum
MUZZLE BRAKE RESTRICTION: All barrels under 16” must utilize a mounting option that includes a muzzle brake when firing supersonic ammunition from bottleneck rifle cartridges.
FULL AUTO RESTRICTIONS: Not for use with belt-fed machine guns / Mounting options with secondary retention should be used for full auto and should be securely Rocksett in place.

NOT FOR USE WITH SHOTSHELL AMMUNITION

NOT FOR USE WITH BARE LEAD BULLETS

NOT FOR USE WITH ABLATIVES